High Hardness Alloy Steel Bar 1.2738 1.2311 1.0503 1.0540 Steel Rods Hot Work Tool

High Hardness Alloy Steel Bar 1.2738 1.2311 1.0503 1.0540 Steel Rods Hot Work Tool

Designation by Standards

Mat. No.	DIN	EN	AISI
1.0540	C50	-	1050

Chemical Composition (in weight %)

C	Si	Mn	Cr	Mo	Ni	V	W	Others
0.51	0.20	0.75	0.20	0.05	0.20	-	-	-

Description C50 is a medium carbon steel is used when greater strength and hardness is desired than in the “as rolled” condition. Applications Quenched and subsequently tempered steel for screws, forgings, wheel tyres, shafts, sickles, axes, knives, wood working drills, hammers, etc. Physical properties (avarage values) at ambient temperature Modulus of elasticity [10³ x N/mm²]: 205 Density [g/cm³]: 7.85 Specific heat capacity[J/g.K]: 0.48 Coefficient of Linear Thermal Expansion 10^{-6 o}C^-1

20-100oC	20-250oC	20-500oC
11.5	13.0	14.0

Soft Annealing Heat to 680-710^oC, cool slowly in furnace. Normalizing Normalizing temperature: 840-880^oC/air. Hardening Harden from a temperature of 820-860^oC followed by water or oil quenching. Tempering Tempering temperature: 550-660^oC/air. Forging Hot forming temperature: 1050-850^oC. Machinability No data. Disclaimer The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

Product Description

Product Name	round steel
Material	ASTM/AISI/ Q195-q345
Diameter	1-1500mm
Standard	DIN GB ISO JIS BA ANSI
Grade	SUS201, SUS304, SUS316, A2-70, A2-80, A4-80, 4.8 6.8 8.8 10.9 12.9
Length	As Your Requirement
Technique	Hot Rolled
Dimensions	As Your Requirement

Packing & Delivery

Packing Details :
1. By steel strips in bundles
2. By woven cloth with 7 slats
3. By wooden pallet
4. According to the requirements of customers

Delivery Details : By sea
1. In bulk ( based on 200 tons)
2. 20 ft container: 25 tons (Length limited 5.8 m MAX)
3. 40 ft container:(Length limited 11.8 m MAX)

round bar rod

alloy steel rod

High Hardness Alloy Steel Bar 1.2738 1.2311 1.0503 1.0540 Steel Rods Hot Work Tool Images